Tools tab
The Tools tab lists the manipulators used by your device according to the license you purchased.
The interest point tool allows you to point an area that you need to focus on like a pointer during a slide presentation.
You can directly choose the color of the pointer by collapsing the accordion menu 
or by clicking on this icon 
.
Tip
Make sure the Interest point management checkbox is ticked in the Pilot configuration of the Advanced system settings to be able to use this feature.
The spotlight allows you to illuminate your model.
With the accordion menu you can directly:
Activate or deactivate the spotlight.
Move the spotlight in the scene with the Translation gizmo
.Change the orientation of the spotlight in the scene with the Rotation gizmo
.
Please find below the spotlight settings available from this icon .
You can enable or disable the Spotlight, adjust its intensity with the slider, and choose the color of the lighting. You can also adjust the intensity of the light reflection (Specular intensity). The more the cursor moves to the right, the more the setting is magnified.
The snapshot tool allows you to snapshot a scene in VR according to the operator's point of view.
You can directly capture the viewport by clicking on the Snapshot button in the accordion menu .
Click this icon to select the folder in which the snapshots will be saved or to set the dimensions of the snapshots while the Snapshot FOV sets the point of view angle.
The mannequin allows you to simulate and see the movements of your body in a 3D environment.
You can directly access its configuration by clicking on this icon or on the Advanced system settings from the accordion menu .
In the Advanced system settings, you can
display the mannequin skeleton
display or hide the mannequin's head
activate the advanced tracking mode (five trackers are required)
Vive Trackers configuration:
Tip
If you are not using the Advanced Tracking Mode of the mannequin, your trackers will be placed on your feet and your waist. If you do, you will have to place an additional tracker on each forearm of your body (as close of your wrists as possible).
Start by pairing your first Vive Tracker using SteamVR (SteamVR > “Device” > “Pair Controller”).
Use your headset, navigate to the “Manage Vive Trackers” section in settings (“Settings” > “Manage Vive Trackers”).
Use the table below to associate your tracker with the corresponding role. Be aware that these roles will not be reset after your session.
Tip
We recommend that you note the roles of each tracker to easily identify them. Steam VR associates the tracker's serial number with the role.
Follow this process for each of your Vive Trackers.
Body part | Role |
|---|---|
Feet (left / right) | Feet (left / right) |
Waist | Waist |
Wrist (left / right) | Shoulders (left / right) |
How to use the mannequin in Accel VR:
The installation of the mannequin in Accel VR is carried out in 2 steps.
Size calibration (mannequin size)
Once all of your Vive Trackers are connected, select the Mannequin tool in the interactive menu.
Stand straight and trigger the interaction. If you see a Mannequin, then you can go to the next section. If not, make sure that all your trackers are connected and that you are not using the “Advanced Tracking Mode” with only 3 Vive Trackers.
Vive tracker calibration
Stand in the Mannequin’s shape and try to make your body fit as much as possible.
Trigger the interaction again to validate.
You can now use the Mannequin tool.
Turntables simulate the rotation of one or more products on a turntable. For example, they make it possible to visually compare several configurations of the same product from different angles.
In the accordion menu you can directly control turntables by selecting the rotation direction (clockwise and counterclockwise) or pausing the animation. It is also possible to change the rotation speed with the dedicated slider Speed (rpm).
You can also adjust the Product Spacing from this icon .
In the Turntables window, adjust the quantities + and - of the products you want to add to the scene, then select the Product Spacing and to finish click on the Start button to begin the turntable(s).
Note
The rotation is performed only along the axis of the rotation which is specific to the product.
The Links tool allows you to link a tracker to one or more products. With this feature, you can imagine moving a product naturally according to the movements of your members for example.
You can select and configure the trackers listed in the Trackers box by expanding the accordion menu or by clicking on this icon .
Follow these steps to link a tracker to one or more products.
In the Links window, select the tracker from the list.
Then with the eyedropper
pick the reference point onto the product. This allows you to link the tracker to the product.
Note
To link a tracker to multiple products, restart at step 1 (describes above) by using the same tracker but by selecting a different product at step 2.
At any time you can break the link from the tracker to the product by clicking on this icon 
. Use the translation gizmos 
and rotation 
if you need to change the reference position of your link.
Warning
Only available with a CAD Tools license option.
The Product Mesh Collider is used to display the intersections between products when they collide.
When the Include avatars in the A group box is ticked, the avatars (head, controllers, hands) are included in group A for the calculation of collisions.
When the Product Mesh Collider is activated (Activate) you can set the collision behavior. The algorithm used requires dividing the products of the scene into two groups A and B. For each product, the collisions with all the products of the other group will be calculated. Collisions between two products of the same group are not calculated.
By selecting Surfaces you will visualize the intersection of the surfaces of product A with the surfaces of product B, an intersection line of the color of your choice appears.
By selecting Volumes you will visualize the intersection of the surfaces of product A within the volumes of product B, a plane of the color of your choice appears.
Here the Product Mesh Collider is set up with a red intersection using the intersection algorithm Volumes.
Here's the result.